banner banner banner banner
Kod QR
Scan Kod QR pada telefon pintar anda untuk versi mudah alih.
banner

Sijil Pembekal dan Rawatan Kayu

ENGLISH VERSION ONLY

LIST OF CERTIFIED TIMBER SUPPLIERS AND TREATERS (CST)

What is "CST"?
List of Certified Timber Suppliers and Treaters, abbreviated as CST is a special listing of selected suppliers and treaters of timber in particular sawntimber, who have succesfully complied with the requirements of a Quality Assurance Scheme (QAS) implemented by MTIB.

The QAS was established by MTIB in collaboration with FRIM following the aftermath of the JKR suspension on use of timber for roof trusses. One of the main concerns of JKR (and PAM as well) was with regard to the quality of timber that are supplied for construction projects in the domestic market.

An idea was mooted to establish a QAS and register suppliers and treaters who could comply with the requirement of the QAS. JKR, PAM and CIDB are committed to make a purchasing decision limiting to source timber that supplied by suppliers listed in the CST

How many categories of applications in this scheme?
There are two categories involved in the QAS CST ie. Timber Suppliers and Timber Treaters.

Who can apply?
Companies producing sawn timber can apply to be registered as Timber suppliers and those treating sawn timber (with treatment plant) can apply to be registered as Timber Treaters.

How to apply?
Application can be made at anytime by filling in the application form that can be downloaded from the MTIB website at http://www.mtib.gov.my or it can be obtained from Industry Development and Research Division, MTIB Kuala Lumpur. The application form is given free of charge.

The completed application form, together with the supporting documents, must be sent to the Industry Development and Research Division, MTIB Kuala Lumpur.

DETAILS & CONDITIONS

What are terms and conditions apply?
Terms and conditions, and the applications forms for each category are stated as follow :
1.1 Supplier
1.1.1 Definition
  Supplier in this context means a company that supplies timber.
1.1.2 Timber Supplied
  Timber, whether treated or untreated that is supplied by the timber supplier and treater as listed in the List of Certified Timber Suppliers and Timber Treaters .
1.1.3 Application for Registration
  Applications can be made by completing the registration form for timber supplier; MTIB/QAS/CST-1 (Appendix I )
1.1.4 Requirements for registration as supplier
 
  1. Company must own a sawmill
  2. Company must possess a minimum of one band saw
  3. Company must be registered with the State Forest Department.
  4. Company must be registered with The Registration of Business (ROB) or Registration of Company (ROC)
  5. Member of Malaysian Wood Industries Association (MWIA) or Persatuan Pengusaha Kayu Kayan dan Perabot Bumiputera Malaysia (PEKA)
1.1.5 Reference Documents required during audit process
 
  1. Employee's records (biodata, academic qualification, training and experience)
  2. Production records (date, timber name, size, moisture content, grading summary)
  3. Invoice record (date, size, grade, quantity, consignee's address)
  4. Other Quality Control System (if any) - a present quality system being used by the company to give a guaranty for the timber supplied
1.2 Treater
1.2.1 Definition
  Treater in this context means a company carrying out treatment activities for timber.
1.2.2 Application for Registration
  Application can be made by completing the registration form for timber treater MTIB/QAS/CST-2 (Appendix II)
1.2.3 Requirements for registration as treater
 
  1. Company must own a treatment plant with the requisite treatment facilities
  2. Company must be registered with State Forest Department
  3. Company must be registered with The Registration of Business (ROB) or The Registration of Company (ROC)
  4. Member of Malaysian Wood Preserving Association(MWPA)
1.2.4 Reference Documents required during audit process
 
  1. Employee's record (biodata, academic qualification training as well as experience)
  2. Record of chemicals used in treatment : purchase records (date, type, quantity, supplier) Record of usage and disposal (date, quantity)
  3. Treatment process (charge sheet, timber name, size, moisture content)
  4. Delivery order (date, size, timber name, class of commodity and quantity)
  5. Invoice record (date, size, timber name, class of commodity and quantity)
  6. Operation manual of treatment chamber
  7. Treatment chamber maintenance records
  8. Other Quality Control System (it any) - a quality system being used to give a guarantee for quality of timber supplied
Application to be listed as Timber Supplier and Treater
Application can be made by completing the form MTIB/QAS/CST-1 for Timber Supplier and/or MTIB/QAS/CST-2 for Timber Treater, whichever is applicable and submit together with the required documents to :

Director General
Malaysian Timber Industry Board (MTIB)
Tingkat 13-17, Menara PGRM
Jalan Pudu Ulu
P.O. Box 10887
50728 Kuala LUMPUR
(Attn: Industry Development Division)

Tel: 03-92822235 Fax : 03-92846214
H/page: www.mtib.gov.my
Email: nazly[at]mtib[dot]gov[dot]my

Timber Supplier And Treater Application Form
  1. Timber Supplier
  2. Timber Treater

REGISTERED COMPANY

Category: Timber Treaters
Not available at this moment

Category: Timber Suppliers
CompanyAddressTelephoneContact
Sim Lee Sawmill Sdn. Bhd. KM3, Jln Lumut, 32000 Lumut, Perak.

05-6835050

 Saw Eng Thai
Aik Bee Timbers (Sbh) Sdn. Bhd. Batu 6 1/2 Jalan Kepong 52000 Kuala Lumpur.

03-62511122

 Choo Kow Boon
Pesama Timber Corporation Sdn. Bhd. Kawasan Perindustrian Jakar, 24000 Kemaman, Terengganu.

09-8591122

 Haji. Abd. Aziz b. Awang Tera
Chang Kam Yee & Sons Sdn.Bhd Lot 3, Mambang Diawan, 31950 Kampar, Perak.

05-4664005

 K.C. Chang
K/P Datuk Wan Ahmad (Raub) Sdn.Bhd KM.20, Jln. Batu Malim, 27620 Raub, Pahang.

09-3697993

 Shin Yit Thong
K/P Mohamad Yusof & Anak-anak (Trg) Sdn.Bhd D987 Bukit Kubang Jambu, Jln Kelantan, 20050 Kuala Terengganu, Terengganu

09-6242175

 Mohd Shoki ariffin
K/P Low Fat Sdn. Bhd Batu 20, Jln. Kuala Berang, Ajil, 21800 Hulu Terengganu, Terengganu

09-6861266

 Low Ken
Bakti Malaysia Sdn.Bhd Wakaf Tengah, Batu Rakit, 21020 Kuala Terengganu, Terengganu

09-6696998

 Goh Chee Yew
Sykt Subari Pembinaan Perniagaan Sdn. Bhd Batu 51 3/4, Jln. Air Hitam (Machap), 86200 Simpang Renggam, Johor

07-7541544

 Soo Poh Lin
Boon Hock sawmill Sdn. Bhd No. 1, Jalan Kamunting, 34600 Kamunting, Perak.

05-8073767

 Ng Eow Siah

CHECK LIST SUPPLIERS

Case
  1. Factory title: own/rent
  2. Factory license from Jabatan Perhutanan Perhutanan Negeri
  3. Certificate Letter from JKKP
  4. Certificate Letter ROB/ROC
  5. Membership Certificate Letter: MWIA/PEKA
  6. Employee records
  7. Log Receipt record
  8. Wood Delivery record
  9. Equipment Maintenance records
  10. Factory Maintenance records
  11. Quality control record
  12. Equipment Manual Control
  13. Quality system manual
Work Environment
  1. Covered work area
  2. Covered drying area
Equipment
  1. Saws splitting logs / timber
  2. Measuring tape
  3. Moisture meter
Wood
  1. The name of the wood in the list SG 1-4
  2. Wood size according to specification
  3. Wood grade according to specifications
Wood Handling
  1. Arrangement with wooden spacers
  2. Storage
  3. Disposal
  4. Packing

CHECK LIST TREATERS

Case
  1. Factory title: own
  2. Factory license from Jabatan Perhutanan Negeri
  3. Certificate Letter from JKKP
  4. Certificate Letter ROB/ROC
  5. Membership Certificate Letter: MWIA/PEKA
  6. Employee records
  7. Log Receipt record
  8. Wood Delivery record
  9. Equipment Maintenance records
  10. Factory Maintenance records
  11. Quality control record
  12. Equipment Manual Control
  13. Quality system manual
Equipment
  1. Pressure pump and gauge
  2. Calibration of pressure and vacuum gauge
  3. Vacuum pump and gauge
  4. Pressure and vacuum gauge at treatment cylinder
  5. Mixing tank with propeller
  6. Instrument for measuring absorption (side glass)
  7. Vacuum/pressure with recording meters
  8. Hydrometer
  9. Glass measuring cylinder
  10. Concentration table
  11. Thermometer
  12. Moisture meter with calibration table/graph
  13. pH paper Measuring tape
Work Environment
  1. Covered and concrete floor work area
  2. Covered drying area and concrete floors
Employee
  1. Plant operations
  2. Factory supervisor
Wood
  1. Name of wood in SG 1-4 list
  2. Wood size according to specification
  3. Wood grade according to specifications
  4. Wood thickness uniformity
  5. Use of sticks during treatment
Durable Material
  1. Complies with the specifications MS 733
  2. Complies with the specifications MS 360
  3. Operation Durable material
  4. Storage
  5. Disposal
Process
  1. Quality control before treatment
  2. Quality control after treatment
  3. Table curing treatment complies with MS 360
  4. Operation wood preserved
  5. Operation advanced treatment


Terakhir dikemaskini: 28 September 2020