1akses
  • List of Certified Timber Suppliers and Treaters (CST) +

    What is "CST"?

    List of Certified Timber Suppliers and Treaters, abbreviated as CST is a special listing of selected suppliers and treaters of timber in particular sawntimber, who have succesfully complied with the requirements of a Quality Assurance Scheme (QAS) implemented by MTIB.

    The QAS was established by MTIB in collaboration with FRIM following the aftermath of the JKR suspension on use of timber for roof trusses. One of the main concerns of JKR (and PAM as well) was with regard to the quality of timber that are supplied for construction projects in the domestic market.

    An idea was mooted to establish a QAS and register suppliers and treaters who could comply with the requirement of the QAS. JKR, PAM and CIDB are committed to make a purchasing decision limiting to source timber that supplied by suppliers listed in the CST

    How many categories of applications in this scheme?

    There are two categories involved in the QAS CST ie. Timber Suppliers and Timber Treaters.

    Who can apply?

    Companies producing sawn timber can apply to be registered as Timber suppliers and those treating sawn timber (with treatment plant) can apply to be registered as Timber Treaters.

    How to apply?

    Application can be made at anytime by filling in the application form that can be downloaded from the MTIB website at http://www.mtib.gov.my or it can be obtained from Industry Development and Research Division, MTIB Kuala Lumpur. The application form is given free of charge.

    The completed application form, together with the supporting documents, must be sent to the Industry Development and Research Division, MTIB Kuala Lumpur.

  • Details & Conditions +

    What are terms and conditions apply?

    Terms and conditions, and the applications forms for each category are stated as follow :-

    1.1
    Supplier
     1.1.1  Definition
       Supplier in this context means a company that supplies timber.
     1.1.2  Timber Supplied
      Timber, whether treated or untreated that is supplied by the timber supplier and treater as listed in the List of Certified Timber Suppliers and Timber Treaters .
    1.1.3 Application for Registration
      Applications can be made by completing the registration form for timber supplier; MTIB/QAS/CST-1 (Appendix I )
    1.1.4 Requirements for registration as supplier
      (i) Company must own a sawmill
    (ii) Company must possess a minimum of one band saw
    (iii) Company must be registered with the State Forest Department. 
    (iv) Company must be registered with The Registration of Business (ROB) or Registration of Company (ROC)
    (v) Member of Malaysian Wood Industries Association (MWIA) or Persatuan Pengusaha Kayu Kayan dan Perabot Bumiputera Malaysia (PEKA)
    1.1.5 Reference Documents required during audit process
      (i) Employee's records (biodata, academic qualification, training and experience)
    (ii) Production records (date, timber name, size, moisture content, grading summary)
    (iii) Invoice record (date, size, grade, quantity, consignee's address)
    (iv) Other Quality Control System (if any) - a present quality system being used by the company to give a guaranty for the timber supplied
    1.2
    Treater
     1.2.1 Definition 
       Treater in this context means a company carrying out treatment activities for timber.
     1.2.2  Application for Registration
      Application can be made by completing the registration form for timber treater MTIB/QAS/CST-2 (Appendix II)
    1.2.3 Requirements for registration as treater
      (i) Company must own a treatment plant with the requisite treatment facilities 
    (ii) Company must be registered with State Forest Department 
    (iii) Company must be registered with The Registration of Business (ROB) or The Registration of Company (ROC)
    (iv) Member of Malaysian Wood Preserving Association(MWPA)
    1.2.4 Reference Documents required during audit process
      (i) Employee's record (biodata, academic qualification training as well as experience)
    (ii) Record of chemicals used in treatment : purchase records (date, type, quantity, supplier) Record of usage and disposal (date, quantity)
    (iii) Treatment process (charge sheet, timber name, size, moisture content)
    (iv) Delivery order (date, size, timber name, class of commodity and quantity)
    (v) Invoice record (date, size, timber name, class of commodity and quantity)
    (vi) Operation manual of treatment chamber
    (vii) Treatment chamber maintenance records
    (viii) Other Quality Control System (it any) - a quality system being used to give a guarantee for quality of timber supplied
    2
    Application to be listed as Timber Supplier and Treater

    Application can be made by completing the form MTIB/QAS/CST-1 for Timber Supplier and/or MTIB/QAS/CST-2 for Timber Treater, whichever is applicable and submit together with the required documents to : 
    Director General
    Malaysian Timber Industry Board (MTIB)
    Tingkat 13-17, Menara PGRM
    Jalan Pudu Ulu
    P.O. Box 10887
    50728 Kuala LUMPUR
    (Attn: Industry Development Division)

    Tel: 03-92822235 Fax : 03-92846214
    H/page: www.mtib.gov.my
    Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

    TIMBER SUPPLIER AND TREATER APPLICATION FORM
     WORDS DOCUMENT : [ Timber Supplier ] [ Timber Treater ]
  • Registered Company +

    a) Category: Timber treaters - not available at this moment

    b) Category: Timber suppliers - 10 companies as stated below:-

    Company
    Address
    Telephone
    Contact
    Sim Lee Sawmill Sdn. Bhd. KM3, Jln Lumut, 32000 Lumut, Perak.

    05-6835050

    Saw Eng Thai
    Aik Bee Timbers (Sbh) Sdn. Bhd. Batu 6 1/2 Jalan Kepong 52000 Kuala Lumpur.

    03-62511122

    Choo Kow Boon
    Pesama Timber Corporation Sdn. Bhd. Kawasan Perindustrian Jakar, 24000 Kemaman, Terengganu.

    09-8591122

    Haji. Abd. Aziz b. Awang Tera
    Chang Kam Yee & Sons Sdn.Bhd Lot 3, Mambang Diawan, 31950 Kampar, Perak.

    05-4664005

    K.C. Chang
    K/P Datuk Wan Ahmad (Raub) Sdn.Bhd KM.20, Jln. Batu Malim, 27620 Raub, Pahang.

    09-3697993

    Shin Yit Thong
    K/P Mohamad Yusof & Anak-anak (Trg) Sdn.Bhd D987 Bukit Kubang Jambu, Jln Kelantan, 20050 Kuala Terengganu, Terengganu

    09-6242175

    Mohd Shoki ariffin
    K/P Low Fat Sdn. Bhd Batu 20, Jln. Kuala Berang, Ajil, 21800 Hulu Terengganu, Terengganu

    09-6861266

    Low Ken
    Bakti Malaysia Sdn.Bhd Wakaf Tengah, Batu Rakit, 21020 Kuala Terengganu, Terengganu

    09-6696998

    Goh Chee Yew
    Sykt Subari Pembinaan Perniagaan Sdn. Bhd Batu 51 3/4, Jln. Air Hitam (Machap), 86200 Simpang Renggam, Johor

    07-7541544

    Soo Poh Lin
    Boon Hock sawmill Sdn. Bhd No. 1, Jalan Kamunting, 34600 Kamunting, Perak.

    05-8073767

    Ng Eow Siah
  • Check List Suppliers +

    Case

    (1) Factory title: own/rent

    (2) Factory license from Jabatan Perhutanan Perhutanan Negeri

    (3) Certificate Letter from JKKP

    (4) Certificate Letter ROB/ROC

    (5) Membership Certificate Letter: MWIA/PEKA

    (6) Employee records

    (7) Log Receipt record 

    (8) Wood Delivery record

    (9) Equipment Maintenance records

    (10) Factory Maintenance records

    (11) Quality control record

    (12) Equipment Manual Control

    (13) Quality system manual

    Work environment:

    (1) Covered work area

    (2) Covered drying area

    Equipment:

    (1) Saws splitting logs / timber

    (2) Measuring tape

    (3) Moisture meter

    Wood:

    (1) The name of the wood in the list SG 1-4

    (2) Wood size according to specification

    (3) Wood grade according to specifications

    Wood handling:

    (1) Arrangement with wooden spacers

    (2) Storage

    (3) Disposal

    (4) Packing

  • Check List Treaters +

    Case

    (1) Factory title: own

    (2) Factory license from Jabatan Perhutanan Negeri

    (3) Certificate Letter from JKKP

    (4) Certificate Letter ROB/ROC

    (5) Membership Certificate Letter: MWIA/PEKA

    (6) Employee records

    (7) Log Receipt record 

    (8) Wood Delivery record

    (9) Equipment Maintenance records

    (10) Factory Maintenance records

    (11) Quality control record

    (12) Equipment Manual Control

    (13) Quality system manual

    Equipment:

    (1) Pressure pump and gauge

    (2) Calibration of pressure and vacuum gauge

    (3) Vacuum pump and gauge

    (4) Pressure and vacuum gauge at treatment cylinder

    (5) Mixing tank with propeller

    (6) Instrument for measuring absorption (side glass)

    (7) Vacuum/pressure with recording meters

    (8) Hydrometer

    (9) Glass measuring cylinder

    (10) Concentration table

    (11) Thermometer

    (12) Moisture meter with calibration table/graph

    (13) pH paper Measuring tape

    Work environment:

    (1) Covered and concrete floor work area

    (2) Covered drying area and concrete floors

    Employee:

    (1) Plant operations

    (2) Factory supervisor

    Wood:

    (1) Name of wood in SG 1-4 list

    (2) Wood size according to specification

    (3) Wood grade according to specifications

    (4) Wood thickness uniformity

    (5) Use of sticks during treatment

    Durable material:

    (1) Complies with the specifications MS 733

    (2) Complies with the specifications MS 360

    (3) Operation Durable material

    (4) Storage

    (5) Disposal

    Process:

    (1) Quality control before treatment

    (2) Quality control after treatment

    (3) Table curing treatment complies with MS 360

    (4) Operation wood preserved

    (5) Operation advanced treatment

  • 1