1akses

MTIB QUOTATION NO.:- MTIB/SH.PP/015/2018

Interested companies registered with Ministry of Finance, Malaysia (MOF) in code number 210202 OR 210203 (registration must be valid at least three (3) months on the date of quotation closing) and registered with Ministry of Internal, Malaysia and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH.PP/015/2018

 

SEBUT HARGA BAGI PERKHIDMATAN MEMASANG KABEL TELEFON DI IBU PEJABAT LEMBAGA PERINDUSTRIAN KAYU MALAYSIA (MTIB)

 

 

12th September 2018 (Wednesday)

14th September 2018 (Friday)

(Before or on 12.00 noon)

 -

 

 

Quotation document can be downloaded at Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 14th September 2018 (Friday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

updated: 12/09/2018

 

MTIB QUOTATION NO.:- MTIB/SH/030/2018 

Interested  companies registered with Ministry of Finance, Malaysia (MOF) in code number 220801 (registration must be valid at least three (3) months on the date of quotation closing) and registered with Ministry of Internal, Malaysia and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH/030/2018

 

SEBUT HARGA BAGI PERKHIDMATAN KAWALAN KESELAMATAN (TANPA SENJATA API) DI FIDEC 1 & 2 BAGI TEMPOH TIGA (3) TAHUN UNTUK LEMBAGA PERINDUSTRIAN KAYU MALAYSIA (MTIB)

 

 

27th August 2018 (Monday)

6th September 2018 (Thursday)

(Before or on 12.00 noon) 

 

 

Date:
30th August 2018 (Thursday) 

 

Time:
10.30 a.m.

 

Venue:

PUSAT BIOKOMPOSIT & GENTIAN (FIDEC 1 & 2)

Lot 152, Kompleks Perabot Olak Lempit,

42700 BANTING, SELANGOR

Tel. No.:

(03-03-3149 1502 / 1509)

 

 

(Contact Person: 
Encik Mohd Jalil Ayub) 

 

(Attendance  is compulsory) 

 

 

Please be reminded ONLY authorized persons are elegible to attend the site visit. For detail information, please refer to the quotation document.

 Quotation document can be downloaded at Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 6th September 2018 (Thursday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

 updated: 27/08/2018

 

MTIB QUOTATION NO.:- MTIB/SH.PP/014/2018 

Interested  companies registered with Ministry of Finance, Malaysia (MOF) in code number 221305 (registration must be valid at least three (3) months on the date of quotation closing) and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH.PP/014/2018

 

SEBUT HARGA BAGI PERKHIDMATAN PENYEDIAAN PERALATAN DAN PERSIAPAN TEMPAT UNTUK MAJLIS PERASMIAN WISDEC 2, SELANGOR

 

 

17th August 2018 (Friday)

28th August 2018 (Tuesday)

(Before or on 12.00 noon) 

 

 

Date:
20th August 2018 (Monday) 

 

Time:
10.00 a.m.

 

Venue:

WOOD INDUSRTY SKILLS DEVELOPMENT CENTRE (WISDEC 2)

No. 5, Jalan 1/1,

Kawasan Perusahaan Olak Lempit

42700 BANTING SELANGOR.

 

Tel. No.:

(03-3149 2924)

 

 

(Contact Person: 
Encik Muhamad Hazree Mohamad Nasir) 

 

(Attendance  is compulsory)  

 

 

Reminder: ONLY authorised persons are elegible to attend the site visit. For detail information, please refer to the quotation document.

Quotation document can be downloaded at Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 28th August 2018 (Tuesday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

updated: 17/08/2018

 

MTIB QUOTATION NO.:- MTIB/SH/029/2018 

Interested  companies registered with Ministry of Finance, Malaysia (MOF) in code number 010201 and 020601 (registration must be valid at least three (3) months on the date of quotation closing) and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH/029/2018

 

SEBUT HARGA BAGI PERKHIDMATAN MEMBEKAL DAN MENGHANTAR BEKALAN ALAT TULIS KOMPUTER (KATEGORI SIMPANAN DATA, KERTAS KOMPUTER DAN FAIL SERTA KATRIJ TONER, RIBBON DAN INK PENCETAK) DI LEMBAGA PERINDUSTRIAN KAYU MALAYSIA (MTIB) BAGI TEMPOH DUA (2) TAHUN

 

 

16th August 2018 (Thursday)

28th August 2018 (Tuesday)

(Before or on 12.00 noon) 

 

 

-

 

 


Quotation document can be downloaded at
 Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 28th August 2018 (Tuesday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

updated: 16/08/2018

 

MTIB QUOTATION NO.:- MTIB/SH/028/2018 

Interested  companies registered with Ministry of Finance, Malaysia (MOF) in code number 221001 OR 221002 and Bumiputera's registered (registration must be valid at least three (3) months on the date of quotation closing) and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH/028/2018

 

SEBUT HARGA BAGI PERKHIDMATAN PEMOTONGAN RUMPUT, PEMBERSIHAN SISTEM PERPARITAN DAN PENYELENGGARAAN LANDSKAP DI SELURUH KAWASAN PEJABAT MTIB KOTA KINABALU, SABAH UNTUK TEMPOH DUA (2) TAHUN

 

 

13th August 2018 (Monday)

27th August 2018

(Tuesday)

(Before or on 12.00 noon) 

 

 

Date:
17th August 2018
(Friday)
 
Time:
10.00 a.m.

 

Venue:

MALAYSIAN TIMBER INDUSTRY BOARD (MTIB)

Lot 4, Fasa 1 Jalan Timur 6,
Taman Perindustrian Kota Kinabalu (KKIP),
Peti Surat 177, Pos Mini Indah Permai,
88450 Kota Kinabalu Sabah

 

No. Tel.: 088-498 822

 

 

(Contact Person: 
Mdm. Ummi Ainul Hafizah Mohd Ismail) 

 

(Attendance  is compulsory) 

 

 

Reminder: ONLY authorised persons are elegible to attend the site visit. For detail information, please refer to the quotation document.

Quotation document can be downloaded at Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 27th August 2018 (Tuesday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

updated: 14/08/2018

 

Interested  companies registered with Ministry of Finance, Malaysia (MOF) in code number 221305 OR 221615 and Bumiputera's registered (registration must be valid at least three (3) months on the date of quotation closing) and are still allowed to bid are invited to participate in the following quotation:-

Quotation No.

Title

Quotation Invitation Date

Quotation Closing Date

Site Visits

MTIB/SH/027/2018

 

SEBUT HARGA BAGI PERKHIDMATAN MEREKA BENTUK RUANG INFORMASI KORPORAT DI TINGKAT 17, MENARA PGRM UNTUK LEMBAGA PERINDUSTRIAN KAYU MALAYSIA (MTIB)

 

 

6th August 2018 (Monday)

21st August 2018

(Tuesday)

(Before or on 12.00 noon) 

 

 

Date:
13th August 2018
(Monday)
 
Time:
10.00 a.m.

 

Venue:

MALAYSIAN TIMBER INDUSTRY BOARD (MTIB)

Level 17, Menara PGRM

No. 8, Jalan Pudu Ulu Cheras

56100 KUALA LUMPUR

 

Tel. No.: 

No. Tel.: 03-9282 2235

 

 

(Contact Person: 
Ms. Emy Zulika Dzulkifly) 

 

(Attendance  is compulsory) 

 

 

Reminder: ONLY authorised persons are elegible to attend the site visit. For detail information, please refer to the quotation document.

Quotation document can be downloaded at Appendix 1. Completed Quotation forms are to be put in sealed envelope and to reach MTIB on or before 21st August 2018 (Tuesday), before or on 12.00 noon for Procurement Unit at the following address:

LEMBAGA PERINDUSTRIAN KAYU MALAYSIA
UNIT PEROLEHAN,
TINGKAT 15, MENARA PGRM,
NO. 8, JALAN PUDU ULU,
56100 CHERAS,
KUALA LUMPUR

Please indicate quotation number and title at the left side (above) of the quotation envelope. MTIB are not responsible for any delay of the quotation document sent through post and are not obliged to accept the lowest or vice versa.

updated: 06/08/2018

Malaysia Agarwood Fair 2017 (MAF2017) will be held in the 2nd Floor East Wing of IOI City Mall Putrajaya on 12 – 14 May 2017. MAF2017 organized by Malaysian Timber Industry Board (MTIB) in line with the National Agarwood Roadmap 2011-2021 under the strategic thrust; Marketing and Promotion. A total of 10 companies of Agarwood products ranging from the Agarwood, Oudh, Perfume, Tea, Coffee, Biscuits and others will be participating in the First Ever Fair held in Malaysia.

For more information on MAF2017 please click HERE:

  • MTIB Lean Management Programme 2017 +

    In order for Malaysia to achieve its status as a developed nation, it is necessary for Malaysians to focus their energy and effort to increase the nation’s productivity rate to a higher level. Apart from promoting innovation, productivity had been identified as one of the key factors by the government in ensuring Malaysia to become a high income nation. One of the ways that a higher productivity rate can be achieved by the timber industry is by implementing Lean Management in their manufacturing system.

    The Malaysian Timber Industry Board (MTIB) had been conducting the Lean Management Programme since 2014 and the results had been remarkable. 40 timber based companies had joined this programme and had a combined total amount of savings of over RM30.0 milllion per year. The savings included labor / overtime, number of workers, work space and maintenance.

    What is Lean?

    Lean refers to a collection of principles that are designed to give focus on the identification and elimination of any non-value added activities for any processes. Lean is based on Toyota Production System (TPS) which organizes manufacturing and logistics for the automobile manufacturer, including interaction with suppliers and customers. Lean functions by eliminating anything that does not give any values to an organization (such as process). There are five principles of lean management:

    • Identifying value from the perspectives of an organization
    • Identifying value stream
    • Allowing a smoother flow of service
    • Providing service as it is being asked (just in time delivery)
    • Aiming for perfection

    Lean Management Programme’s Objectives

    (a) Identifying the source of waste in any main processes and planning improvement counter measures
    (b) Utilising Lean Management to increase the efficiency of any processes and operation which lead to higher productivity.
    (c) Increases the efficiency of product delivery and customer satisfaction.
    (d)  Encouraging the sharing of best practices amongst organisations to become more productive and competitive

    Why the timber industry need to join?

    MTIB had conducted this programme yearly since 2014. As of 2016, 41 timber based companies had joined this programme. Those companies had managed to record a combined total amount of savings of RM33.6 million per year. This included savings of maintenance, overtime, space and inventory. In addition, there has also been an increase in the efficiency of facility layout as well as the encouragement of proper standard of operations (SOPs) in place. To quote one of our participants:

    “I have never heard the word lean before we join this program. But today, lean practice helps us generate unconventional and effective solution for daily challenge. Improvement and lean effort also help us to increase our productivity by using less resources while the company can enjoy more benefits with our co-workers. Now we know how to map our process with VSM and other lean tools, in order to deliver premium products to the whole world, on time, at a competitive price.

    We really appreciate MTIB’s effort to organise this program for this industries while a big thanks (to our consultant) who gives us a very great training and knowledge about lean manufacturing.”

    Lean management improve the work processes in any manufacturing operations which includes floor layout plan, logistics management and maintenance. Therefore, waste can be avoided and thus resulted in increased productivity.

    Each organisation who are selected to join this programme will undergo the following 3 phases:

    (i) Phase 1: Lean Mindset Change
    (ii) Phase 2: Development and Implementation of Lean Management Programme
    (iii) Phase 3: Impact measurement, sharing of best practices

    Methodology

    This programme is a combination of training, consultation, evaluation and best knowledge sharing practices that will enable each organisation to increase its productivity through improvements in the efficiency of its system, operation and management.

    These programmes will be conducted and guided by expertly trained consultants from 6 - 8 months

    Cost

    This programme is FREE OF CHARGE. However, slots are very LIMITED

    Time

    These programmes are expected to begin June / July 2017

    Closing Date

    Registration will be closed at 2 Jun 2017

    Commitment

    It is crucial that the programme received high commitment from each company’s upper management. Each selected company are OBLIGATED to participate in all activities organised by MTIB throughout the duration of the programme.

    Each selected companies are REQUIRED to sign a Memorandum of Agreement (MoA) with MTIB as a sign of commitment to complete the programme. In an event if the company failed to to complete the programme, a compound will be imposed to the company.

  • Requirements for LEAN +

    Each participants must fulfill the following critierias to apply for the programmes :

    i. Fill in the Lean 2017 application form;
    ii. Company must be incorporated in Peninsular Malaysia;
    iii. Registered with MTIB;
    iv. Priority is given if company participated in any of the following programes

    •  ‘Malaysian Pride’
    • SCORE
    • MCORE
    • Any other governmental initiatives to develope the timber industry

    v. Application must include the following:

    • Amount of workers (Please specify amount of local and foreign workers)
    • Company revenue in 2015 and 2016
    • Total product export for 2015 and 2016
    • Form 24 and 49 as per Akta Syarikat  1965
    • Memorandum of Article
    • Pictures factory’s inner and outer  surroundings
    • Pictures of company products
    • Factory settlement status
    • Company insolvency report status

    All documents must be prepared in folio form.  Inability to follow or fulfill all stated requirements will resulted in your appication being NOT CONSIDERED or DENIED by MTIB. All information shall only be used internally by MTIB and will be considered PRIVATE & CONFIDENTIAL.

    Forward all documents to the following address:

    Ketua Pengarah
    Lembaga Perindustrian Kayu Malaysia (MTIB)
    Tingkat 13- 17,Menara PGRM, No. 8, Jalan Pudul Ulu, Cheras
    56100 Kuala Lumpur
    ( U/P : Pengarah Perancangan Strategik & Hal Ehwal Korporat)

    Site Visits

    In order to determine the company suitability for the programme, MTIB representatives will be conducting site visits to the company.

    Results

    Based on the provided document and results from the site visits, MTIB shall decide on the companies that will be offered to join the programmes. All decisions are FINAL

    Further Information

    Please refer to the following officers.

    • En. Shamsul Azman Abdul Aziz (tel; 03-92822235 ext 1367/ fax; 03-92810729 /This email address is being protected from spambots. You need JavaScript enabled to view it. ).

    • En. Rasfan Akram Hj. Akmal (tel; 03-92822235 ext 1316/ fax ; 03-92810729 / This email address is being protected from spambots. You need JavaScript enabled to view it. ),

    MTIB Lean Management Programme 2017

    Phase

    Activities

    Target

    Purpose

    Location

    Duration

    Month

    1

    2

    3

    4

    5

    6

    1

    Lean Awareness Programme

    Upper management of all participated companies

    Basic Lean Training

    To be determined

    1  day

    Lean Intensive Workshop and Value Stream Mapping

    All employees

    Exposure of Lean Management and identification of processes to be improved

    Participant’s companies

    2 days

    2

    Visit # 1

    Current Status Follow up

    1 day

    Visit # 2

    1 day

    Visit # 3

    1 day

    3

    Presentation to MTIB

    Presentation of Lean result to MTIB

    1 day

    Presentation at Lean Creanova Programme (to be determined)

    Presentation of Lean result

    To be determined

    1 day

    *Contents of this programme are under the purview of MTIB and shall be subjected to change from time to time without prior notice

    Download Lean Management Programma 2017 Application Form

  • 1
  • MTIB Good Manufacturing Practices (GMP) - 5s Programme 2017 +

    MTIB Good Manufacturing Practices (GMP) – 5S Programme 2017

    The Malaysian timber industry has contributed to about 2.8% (or RM 22.11 billion) of Malaysia’s total export to the world. Unfortunately, the industry has been branded 3D or Dirty, Dangerous and Difficult which has resulted in the declining rate of local labour force to join this industry due to its less than desirable perception.

    In order to counter this misperceptions, the Malaysian Timber Industry Board (MTIB) has begun conducting the Good Manufacturing Practices (GMP) – 5S since 2015 for the timber industry. 39 timber companies had sign up for the programme and overall had achieved impressive results. As a collective, the 39 companies had recorded savings of RM 280,200 per year and this include labout cost, workplace savings and total time search for equipment.

     

    What is GMP – 5S?

    Good Manufacturing Practices (GMP) – 5S emphasizes on the encouragement of creating a safer and more conducive work environment. This is to reduce the rate of work place accident and therefore retain existing workforce whilst attracting new ones to work for timber based factories. 

    GMP – 5S Programme Objectives

    (i) Establishing level of productivity and Standard of Operation (SOP)
    (ii) Encouragement of systematic production to reduce operation cost
    (iii) Improving knowledge and skills of the timber industry by encouraging sharing of good manufacturing practices among the timber industry
    (iv) Establish safer and more condusive work environment.

    Each organisation who are selected to join this programme will undergo the following 3 phases:

    i) Phase 1  : GMP – 5S Awareness & Training
    ii) Phase 2 : GMP – 5S Tools & Techniques Comprehensive Training
    iii) Phase 3: Implementation of GMP – 5S at factory sites

    Methodology

    This programme is a combination of training, consultation, evaluation and best knowledge sharing practices that will enable each organisation to increase its productivity through improvements in the efficiency of its system, operation and management.These programmes will be conducted and guided by expertly trained consultants from 6 - 8 months

    Cost

    This programme is FREE OF CHARGE. However, the number of participants are LIMITED

    Time

    These programmes are expected to begin June / July 2017

    Closing Date

    Registration will be closed at 2 Jun 2017

    Commitment

    It is crucial that the programme received high commitment from each company’s upper management. Each selected company are OBLIGATED to participate in all activities organised by MTIB throughout the duration of the programme.

    Each selected companies are REQUIRED to sign a Memorandum of Agreement (MoA) with MTIB as a sign of commitment to complete the programme. In an event if the company failed to to complete the programme, a compound will be imposed to the company.

     

     

  • Requirements +

    1. Fill in the GMP – 5S 2017 application form;
    2. Company must be incorporated in Peninsular Malaysia;
    3. Registered with MTIB;
    4. Priority is given if company participated in any of the following programes

    • ‘Malaysian Pride’ 
    • SCORE 
    • MCORE 
    • Any other governmental initiatives to develope the timber industry

    v. Application must include the following:

    • Amount of workers (Please specify amount of local and foreign workers) 
    • Company revenue in 2015 and 2016 
    • Total product export for 2015 and 2016 
    • Form 24 and 49 as per Akta Syarikat  1965 
    • Memorandum of Article
    • Pictures factory’s inner and outer  surroundings
    • Pictures of company products 
    • Factory settlement status 
    • Company insolvency report status

    All documents must be prepared in folio form.  Inability to follow or fulfill all stated requirements will resulted in your appication being NOT CONSIDERED or DENIED by MTIB. All information shall only be used internally by MTIB and will be considered PRIVATE & CONFIDENTIAL.

    Forward all documents to the following address:

    Ketua Pengarah 
    Lembaga Perindustrian Kayu Malaysia (MTIB)
    Tingkat 13- 17,Menara PGRM, No. 8, Jalan Pudul Ulu, Cheras
    56100 Kuala Lumpur
    ( U/P : Pengarah Perancangan Strategik & Hal Ehwal Korporat)

     

    Site Visits

    In order to determine your company suitability for the programme, MTIB representatives will be conducting site visits to your company.

    Results

    Based on the provided document and results from the site visits, MTIB shall decide on the companies that will be offered to join the programmes. All decisions are FINAL.

    Further Information

    Please refer the following officers.

    • En. Shamsul Azman Abdul Aziz (tel; 03-92822235 ext 1367/ fax; 03-92810729 /This email address is being protected from spambots. You need JavaScript enabled to view it. ).

    • En. Rasfan Akram Hj. Akmal (tel; 03-92822235 ext 1316/ fax ; 03-92810729 / This email address is being protected from spambots. You need JavaScript enabled to view it. ),

    MTIB Good Manufacturing Practices (GMP) 5S 2017* programme in detail

    Phase

    Activities

    Target

    Purpose

    Location

    Duration

    Month

    1

    2

    3

    4

    5

    6

    1

    GMP – 5S Awareness

    All

    Brief course on GMP – 5S

      To be determined

    1/2 day

               

    2

    GMP – 5S comprehensive training

    All participants

    Mengajar peserta kaedah pelaksanaan GMP - 5S

    To be determined

    1 day

               

    3

    Visit # 1

    All participants

    Current Status Follow up

    Participant’s companies

    1/2 day

               

    Visit # 2

           

    Visit # 3

           

    Visit # 4

           

    Presentation to MTIB

    Presentation to MTIB

    *Contents of this programme as well as the of date of implementation of each activities are under the purview of MTIB and shall be subjected to changed from time to time

    Download GMP – 5S 2017 Application Form

  • 1

The Malaysian Timber Industry Board (MTIB) will organize a Seminar on Good Agriculture Practices (GAP) on Forest Plantation. Details are as follows:-

                        Date     :           23 - 24 May 2017

                        Time     :           8.00 am – 5.00 pm

                        Venue   :           Tanggam Design Centre, Kota Damansara

                                                Petaling Jaya, Selangor

Participation is limited to 30 participants only on a first come first serve basis. For further inquiries, please contact the secretariat at 03-92822235 ext 1370 (Forest Plantation Division). Book your seats now before 19 May 2017.

Click here for more information

The Malaysian Timber Industry Board (MTIB) will organize a Seminar on Good Agriculture Practices (GAP) on Forest Plantation. Details are as follows:-

Date : 23 - 24 May 2017

Time : 8.00 am – 5.00 pm

Venue : Tanggam Design Centre, Kota Damansara

Petaling Jaya, Selangor

Participation is limited to 30 participants only on a first come first serve basis. For further inquiries, please contact the secretariat at 03-92822235 ext 1370 (Forest Plantation Division). Book your seats now before 19 May 2017.

Click here for more information.

There are career opportunities for committed and ambitious individuals to join our team of dedicated staff at MTIB. If you have the qualifications and experience as well as the desire to join a growing and proactive team of professionals, we are eager to hear from you. Interested candidates can obtain the necessary application form through this portal (Download) or from our headquarters at: Malaysian Timber Industry Board
Level 14, Menara PGRM,
Jalan Pudu Ulu, Cheras,
50728 Kuala Lumpur,
Tel: 03-92822235
Fax: 03-92851744 Advertisement Details

 

Berkuatkuasa 1 Februari 2009, perintah Ses Batang Kelapa sebanyak RM50 per meterpadu telah diwartakan. Semua pengeksportan batang kelapa adalah tertakluk kepada kadar baharu tersebut.

Pengeluaran Dan Pemprosesan Lesen Import (JK 69) Di Pejabat MTIB Wilayah/Negeri.

Bermula 1 JANUARI 2009, pengeluaran dan pemprosesan lesen import (JK 69) bagi kayu balak/LSS dan kayu bakau akan dilaksanakan di semua pejabat MTIB Wilayah/Negeri yang mengeluarkan dan memproses lesen import.

[view pdf file]